Hello-Option Override-Interval (Ipv6 Pim View); Holdtime Assert (Ipv6 Pim View) - H3C MSR 20-20 Command Reference Manual

Description
Related command:
Example

hello-option override-interval (IPv6 PIM view)

Syntax
View
Parameter
Description
Related command:
Example

holdtime assert (IPv6 PIM view)

Syntax
Use the
hello-option neighbor-tracking
suppression, namely enable neighbor tracking.
Use the
undo hello-option neighbor-tracking
suppression.
By default, join suppression is enabled, namely neighbor tracking is disabled.
pim ipv6 hello-option neighbor-tracking.
# Disable join suppression globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option neighbor-tracking
hello-option override-interval interval
undo hello-option override-interval
IPv6 PIM view
interval: Prune override interval in milliseconds, with an effective range of 1 to
65,535.
Use the
hello-option override-interval
value of the prune override interval.
Use the
undo hello-option override-interval
setting.
By default, the prune override interval is 2,500 milliseconds.
hello-option lan-delay (IPv6 PIM view), pim ipv6 hello-option lan-delay and
pim ipv6 hello-option override-interval.
# Set the prune override interval to 2,000 milliseconds globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option override-interval 2000
holdtime assert interval
undo holdtime assert
command to globally disable join
command to enable join
command to configure the global
command to restore the default
1481