Display Mld Interface - H3C MSR 20-20 Command Reference Manual

1444 C 92: MLD C
HAPTER

display mld interface

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
Last-listener-query-timer-expiry: off
Group mode: include
Version1-host-present-timer-expiry: off
Table 351 Description on the fields of the display mld group command
Field
Group
Uptime
Expires
Last reporter
Last-listener-query-counter
Last-listener-query-timer-expiry
Group mode
Version1-host-present-timer-expiry
display mld interface [ interface-type interface-number ] [ verbose ]
Any view
interface interface-type interface-number: Specifies an interface by its type and
number. If you do not specify an interface, this command will display the
information of all interfaces running MLD.
verbose: Displays detailed MLD configuration and operation information.
Use the
display mld interface
operation information on the specified interface or all MLD-enabled interfaces.
# View the detailed MLD configuration and operation information on Ethernet
1/0.
<Sysname> display mld interface ethernet 1/0 verbose
Ethernet1/0(FE80::200:AFF:FE01:101):
MLD is enabled
Current MLD version is 2
Value of query interval for MLD(in seconds): 125
Value of other querier present interval for MLD(in seconds): 255
Value of maximum query response time for MLD(in seconds): 10
Value of startup query interval(in seconds): 31
Value of startup query count: 2
General query timer expiry (hours:minutes:seconds): 00:00:23
Querier for MLD: FE80::200:AFF:FE01:101 (this router)
MLD activity: 1 joins, 0 leaves
Multicast ipv6 routing on this interface: enabled
Robustness: 2
Require-router-alert: disabled
Description
IPv6 multicast group address
Length of time since the IPV6 multicast group was
joined
Remaining time of the IPv6 multicast group
IPv6 address of the host that last reported
membership for this group
Number of MLD multicast-address-specific queries
sent
Remaining time of the MLD last listener query
timer
Filtering mode of multicast sources
Remaining time of the MLDv1 host present timer
command to view MLD configuration and