Display Ip Routing-Table Statistics - H3C MSR 20-20 Command Reference Manual

940 C 71: IP R
HAPTER OUTING

display ip routing-table statistics

Syntax
View
Parameters
Description
Examples
T C
ABLE OMMANDS
Direct Routing table Status : < Inactive>
Summary Count : 0
# Display summary information about static routes.
<Sysname> display ip routing-table protocol static
Public Routing Table : Static
Summary Count : 2
Static Routing table Status : < Active>
Summary Count :
Static Routing table Status : < Inactive>
Summary Count : 2
Destination/Mask
1.2.3.0/24
3.0.0.0/8
For detailed description of the above output, see Table 204.
display ip routing-table [ vpn-instance vpn-instance-name ] statistics
Any view
vpn-instance vpn-instance-name: Displays routing table information for a VPN
instance. The VPN instance name is a string of 1 to 31 characters.
Use the
display ip routing-table statistics
about the public network routing table or a VPN routing table.
# Display statistics about the routes in the routing table.
<Sysname> display ip routing-table statistics
Proto route
DIRECT 24
STATIC 4
RIP 0
OSPF 0
IS-IS 0
BGP 0
Total 28
Table 205 Description on the fields of the display ip routing-table statistics command
Field Description
Proto Origin of the routes. Possible values include O_ASE for OSPF_ASE routes,
O_NSSA for OSPF NSSA, and AGGRE for aggregated routes.
route Number of routes from the origin
active Number of active routes from the origin
added Number of routes added into the routing table since the router starts up
or the last routing table reset operation
0
Proto Pre Cost
Static 60 0
Static 60 0
active added
4 25
1 4
0 0
0 0
0 0
0 0
5 29
NextHop Interface
1.2.4.5 Vlan10
2.2.2.2 Eth1/0
command to display statistics
deleted
1
0
0
0
0
0
1
freed
0
0
0
0
0
0
0