Display Mpls Fast-Forwarding Cache - H3C MSR 20-20 Command Reference Manual

95

display mpls fast-forwarding cache

Syntax
View
Parameter
Description
Example
MPLS B
C
OMMANDS
n
Currently, these interface types support MPLS capability and LDP capability:
■
serial interface, async interface, Layer 3 Ethernet interface (Ethernet interface,
GE interface, and XGE interface), ATM interface, POS interface, Layer 3 virtual
Ethernet interface (that is, virtual-Ethernet interface), virtual template,
Mp-group interface, MFR interface, tunnel interface, VLAN interface, and
virtual dial template (that is, dialer).
Except for the LDP GR feature, all commands in MPLS LDP view are available in
■
MPLS LDP VPN instance view. The difference is that the commands serves the
public network LDP in MPLS LDP view but serves the MPLS LDP VPN instance in
MPLS LDP VPN instance view.
For information about GR commands, refer to "Basic Configuration
■
Commands" on page 2405 and "Information Center Configuration
Commands" on page 2425.
display mpls fast-forwarding cache [ verbose ]
Any view
verbose: Displays detailed information.
Use the display mpls fast-forwarding cache
about the MPLS fast forwarding cache.
# Display information about the MPLS fast forwarding cache.
<Sysname> display mpls fast-forwarding cache
Fast-Forwarding Cache:
Label Input_If
1044 GE0/0
1049 E2/0
# Display detailed information about the MPLS fast forwarding cache.
<Sysname> display mpls fast-forwarding cache verbose
Fast-Forwarding Cache:
Label Input_If
1044 GE0/0
Fast-Forwarding Cache PreIpHead:
FF 03 00 21
1049 E2/0
Fast-Forwarding Cache PreMplsHead:
FF 03 02 81 00 46 40 FE
C
ASICS ONFIGURATION
total 2 items
Output_If
E2/0
GE0/0
total 2 items
Output_If
E2/0
GE0/0
command to display information
Len Flg
4 IP
8 MPLS
Len Flg
4 IP
8 MPLS
Used
83
81
Used
15
13