Qos Map-Table Dot1P-Ip; Import - H3C MSR 20-20 Command Reference Manual

1840 C 118: P
HAPTER RIORITY

qos map-table dot1p-Ip

Syntax
View
Parameters
Description
Related commands:
Examples

import

Syntax
View
Parameters
Description
M T C
APPING ABLE ONFIGURATION
qos map-table dot1p-lp
System view
dot1p-lp: Mapping table of 802.1p priority to local priority.
Use the
qos map-table
view.
display qos map-table.
# Enter the mapping table view from 802.1p priority to local priority.
<Sysname> system-view
[Sysname]qos map-table dot1p-lp
[Sysname-maptbl-dot1p-lp]
import import-value-list export export-value
undo import { import-value-list | all }
Priority mapping table view
import-value-list: Maps input parameter list.
export-value: Maps export parameters.
all: Deletes all parameters in this mapping table.
Use the command to configure the parameters in the specified priority
import
mapping table to define a mapping rule or a group of mapping rules.
Use the
undo import
specified mapping index. The deleted entries are restored to default value.
The default value is shown in the following table:
Table 488 Parameters in the default mapping table
802.1p priority
0
1
2
3
C
OMMANDS
command to enter the specified priority mapping table
command to delete the mapping entries corresponding to
Local priority
2
0
1
3