Robust-Count (Mld View) - H3C MSR 20-20 Command Reference Manual

Description
Related command:
Example

robust-count (MLD view)

Syntax
View
Parameter
Description
prefix-length: Prefix length of the specified multicast source or multicast group.
For a multicast source address, this argument has an effective value range of 0 to
128; for a multicast group address, it has an effective value range of 8 to 128. The
system default is 128 in both cases.
Use the
reset mld group
Note that:
When you clear MLD forwarding entries on a VLAN interface, the MLD
■
Snooping forwarding entries for this VLAN interface will also be cleared.
You cannot use this command to clear MLD forwarding entries for static joins.
■
display mld group.
# Clear all MLD forwarding entries on all interfaces.
<Sysname> reset mld group all
# Clear all MLD forwarding entries on Ethernet 1/0.
<Sysname> reset mld group interface ethernet 1/0 all
# Clear all MLD forwarding entries for the IPv6 multicast group FF03::101:10 on
Ethernet 1/0.
<Sysname> reset mld group interface ethernet 1/0 ff03::101:10
# Clear all MLD forwarding entries for IPv6 multicast groups in the
FF03::101:0/112 range on Ethernet 1/0.
<Sysname> reset mld group interface ethernet 1/0 ff03::101:10 112
robust-count robust-value
undo robust-count
MLD view
robust-value: MLD querier robustness variable, with an effective range of 2 to 5.
The MLD robustness variable determines the number of general queries the MLD
querier sends on startup and the number of MLD group-specific queries the MLD
querier sends upon receiving an MLD done message.
Use the
robust-count
variable globally.
Use the
undo robust-count
command to clear MLD forwarding entries.
command to configure the MLD querier robustness
command to restore the system default.
1457