Resend Interval - H3C MSR 20-20 Command Reference Manual

1734 C 100: VAM C
HAPTER
Related command:
Example

resend interval

Syntax
View
Parameter
Description
Related command:
Example
C C
LIENT ONFIGURATION OMMANDS
Use the undo pre-shared-key
key. That is, no encryption or authentication is performed on protocol packets.
No pre-shared key is configured by default.
Note that you should configure the same pre-shared keys for all the devices on the
same VPN. The VAM server generates keys based on the configured pre-shared
key to protect initialization packets.
vam client name, and pre-shared-key (VPN domain view).
# Configure the pre-shared key for the VAM client to 123 in plain text.
<Sysname> system-view
[Sysname] vam client name abc
[Sysname-vam-client-name-abc] pre-shared-key simple 123
resend interval time-interval
undo resend interval
VAM client view
time-interval: Protocol packet retransmission interval, in the range 3 to 30
seconds.
Use the
resend interval
to resend VAM protocol packets.
Use the undo resend interval
By default, the retransmission interval is 5 seconds.
After sending protocol packets to the VAM server, the VAM client will resend the
packets if no response is received from the server within the specified interval. The
protocol packets include: initialization request packets, initialization finished
packets, registration request packets, authentication request packets, address
resolution packets, and stop-accounting packets.
vam client name.
# Configure the interval for the VAM client to resend VAM protocol packets to 20
seconds.
<Sysname> system-view
[Sysname] vam client name abc
[Sysname-vam-client-name-abc] resend interval 20
command to delete the configured pre-shared
command to configure the interval for the VAM client
command to restore the default.