display ospfv3 peer statistic
Syntax
View
Parameters
Description
Examples
display ospfv3 request-list
Syntax
View
Parameters
display ospfv3 peer statistic
Any view
None
Use the
display ospfv3 peer statistic
all OSPFv3 neighbors on the router, that is, numbers of neighbors in different
states.
# Display information about all OSPFv3 neighbors.
<Sysname> display ospfv3 peer statistic
OSPFv3 Router with ID (1.1.1.1) (Process 1)
----------------------------------------------------------------------
Area ID
Down
0.0.0.0
0
Total
0
Table 306 Description on the fields of the display ospfv3 peer statistic command
Field
Description
Area ID
Area ID
Down
In this state, neighbor initial state, the router has not received any
information from a neighboring router for a period of time.
Init
In this state, the router received a Hello packet from the neighbor but the
packet gives no ID of the router. Mutual communication is not available.
2-Way
Indicates mutual communication between the router and its neighbor is
available. DR/BDR election is finished under this state (or higher).
ExStart
In this state, the router decides on the initial DD sequence number and
master/slave relationship of the two parties.
Exchange
In this state, the router exchanges DD packets with the neighbor.
Loading
In this state, the router send LSRs to request the neighbor for needed LSAs.
Full
Indicates LSDB synchronization has been accomplished between neighbors.
Total
Total number of neighbors under the same state
display ospfv3 [ process-id ] request-list [ statistics ]
Any view
process-id: OSPFv3 process ID, in the range 1 to 65535.
statistics: Statistics of link state request list.
command to display information about
Neighbor Statistics
Init
2-way
ExStar
0
0
0
0
0
0
1289
Exchange Loading
Full
0
0
1
0
0
1