H3C MSR 20-20 Command Reference Manual page 927

undo vty-switch threshold
View Terminal template view
Parameters times: Threshold for VTY automatic switching, in times, ranging 1 to 1,0000.
Description Use the
automatic switching.
Use the
By default, no threshold is configured; that is, no switching is performed.
Note that this command takes effect only in RTC client terminal access. After this
configuration, when an RTC client needs to initiate a connection to an RTC server,
it first initiates a connection to the RTC server with the lowest VTY number. If the
number of connection failures exceeds the threshold, the RTC client initiates a
connection to the RTC server with the second lowest VTY number.
Example # Set the threshold for automatic VTY switching.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] vty-switch threshold 5
vty-switch threshold
undo vty-switch threshold
command to configure the threshold for VTY
command to restore the default.
927