Display Ipv6 Routing-Table Ipv6-Prefix; Display Ipv6 Routing-Table Protocol - H3C MSR 20-20 Command Reference Manual

946 C 71: IP R
HAPTER OUTING

display ipv6 routing-table ipv6-prefix

Syntax
View
Parameters
Description
Examples

display ipv6 routing-table protocol

Syntax
View
Parameters
Description
T C
ABLE OMMANDS
Interface : NULL0
Destination: 300::/64
NextHop : ::
Interface : NULL0
Refer to Table 209 for description about the above output.
display ipv6 routing-table ipv6-prefix ipv6-prefix-name [ verbose ]
Any view
ipv6-prefix-name: Name of the IPv6 prefix list, in the range 1 to 19 characters.
verbose: Displays both active and inactive verbose routing information. Without
this keyword, only brief active routing information is displayed.
Use the
display ipv6 routing-table ipv6-prefix
permitted by the IPv6 prefix list.
# Display brief active routing information permitted by the IPv6 prefix list abc2.
<Sysname> display ipv6 routing-table ipv6-prefix abc2
Routes Matched by Prefix list
Summary Count : 1
Destination: 100::/64
NextHop : ::
Interface : NULL0
Refer to Table 209 for description about the above output.
display ipv6 routing-table protocol protocol [ inactive | verbose ]
Any view
protocol: Displays the routes of a routing protocol, not including routes
redistributed into the protocol. The protocol can be bgp4+, direct, isisv6,
ospfv3, ripng or static.
inactive: Displays only inactive routes. Without the keyword, all active and
inactive routes are displayed.
verbose: Displays both active and inactive verbose routing information. Without
this keyword, only brief active routing information is displayed.
Use the
display ipv6 routing-table protocol
specified routing protocol.
command to display routes
abc :
command to display routes of a
Cost : 0
Protocol : Static
Preference: 60
Cost : 0
Protocol : Static
Preference: 60
Cost : 0