Remark Dot1P; Remark Dscp - H3C MSR 20-20 Command Reference Manual

1796 C 109: D
HAPTER EFINING

remark dot1p

Syntax
View
Parameters
Description
Related commands:
Examples

remark dscp

Syntax
View
Parameters
T B C
RAFFIC EHAVIOR OMMANDS
remark dot1p 8021p
undo remark dot1p
Traffic behavior view
8021p: Remarked 802.1p priority value, in the range 0 to 7.
Use the
remark dot1p
remarked packet.
Use the
undo remark dot1p
from the remarked packet.
By default, no 802.1p priority is marked.
qos policy, traffic behavior, classifier behavior.
# Set the 802.1p priority value of the remarked packet to 2.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark dot1p 2
remark dscp dscp-value
undo remark dscp
Traffic behavior view
dscp-value: DSCP value, in the range 0 to 63, which can be any of these keywords
listed in Table 479:
Table 479 DSCP keywords and values
Keyword
default
af11
af12
af13
af21
af22
af23
af31
command to configure the 802.1p priority value of the
command to remove the 802.1p priority value
DSCP value (binary)
000000
001010
001100
001110
010010
010100
010110
011010
DSCP value (decimal)
0
10
12
14
18
20
22
26