Display Bgp Ipv6 Paths - H3C MSR 20-20 Command Reference Manual

1228 C 82: IP 6 BGP C
HAPTER V
Description
Examples

display bgp ipv6 paths

Syntax
View
Parameters
Description
Examples
C
ONFIGURATION OMMANDS
Use the display bgp ipv6 network
with the network command.
# Display IPv6 routes advertised with the network command.
<Sysname> display bgp ipv6 network
BGP Local Router ID is 1.1.1.2.
Local AS Number is 200.
Network
2002::
2001::
Table 288 Description on the fields of the display bgp ipv6 network command
Field
BGP Local Router ID
Local AS Number
Network
Prefix
Route-policy
Short-cut
display bgp ipv6 paths [ as-regular-expression ]
Any view
as-regular-expression: AS path regular expression.
Use the
display bgp ipv6 paths
information.
If no parameter is specified, all path information will be displayed.
# Display IPv6 BGP path information.
<Sysname> display bgp ipv6 paths
Address
0x5917098
0x59171D0
Table 289 Description on the fields of the display bgp ipv6 paths command
Field Description
Address Route destination address in local database, in dotted hexadecimal
notation
Hash Hash index
Refcount Count of routes that used the path
MED MED of the path
command to display IPv6 routes advertised
Mask Route-policy
64
64
command to display IPv6 BGP path
Hash Refcount MED
1 1
9 2
Short-cut
Short-cut
Description
BGP Local Router ID
Local AS Number
Network address
Prefix length
Routing policy
Shortcut route
Path/Origin
0 i
0 100i