Queue-Length; Wred - H3C MSR 20-20 Command Reference Manual

Examples

queue-length

Syntax
View
Parameters
Description
Related commands:
Examples

wred

Syntax
View
# Configure WFQ for default-class and the queue number is 16.
<Sysname> system-view
[Sysname] traffic behavior test
[Sysname-behavior-test] queue wfq 16
[Sysname] qos policy user1
[Sysname-qospolicy-user1] classifier default-class behavior test
queue-length queue-length
undo queue-length queue-length
Traffic behavior view
queue-length: The maximum threshold value of the queue, in the range 1 to 512.
The queue length is 64.
Use the
queue-length
drop mode is tail drop.
Use the
undo queue-length
By default, tail drop is configured.
This command can be used only after the queue af or queue wfq command has
been configured.
The queue-length, which has been configured, will be deleted when the undo
queue af or undo queue wfq command is executed.
The queue-length, which has been configured, will be deleted when the random
drop mode is configured via the wred command, and vise versa.
qos policy, traffic behavior, classifier behavior.
# Configure tail drop and set the maximum queue length to 16.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] queue af bandwidth 200
[Sysname-behavior-database] queue-length 16
wred [ dscp | ip-precedence ]
undo wred
Traffic behavior view
command to configure maximum queue length, and the
command to delete configuration.
1829