Peer Route-Limit (Bgp/Bgp-Vpn Instance View); Peer Route-Policy (Bgp/Bgp-Vpn Instance View) - H3C MSR 20-20 Command Reference Manual

1002 C 72: BGP C
HAPTER

peer route-limit (BGP/BGP-VPN instance view)

Syntax
View
Parameters
Description
Examples

peer route-policy (BGP/BGP-VPN instance view)

Syntax
View
C
ONFIGURATION OMMANDS
peer { group-name | ip-address } route-limit limit [ percentage ]
undo peer { group-name | ip-address } route-limit
BGP view/BGP-VPN instance view
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
limit: Upper limit of IP prefixes that can be received from the peer or peer group, in
the range 1 to 10000.
percentage: If the number of received routes reaches the specified percentage of
the upper limit, the system will generate alarm information. The percentage is in
the range from 1 to 100. The default is 75.
Use the
peer route-limit
can be received from a peer/peer group.
Use the
undo peer route-limit
The number is unlimited by default.
# In BGP view, set the number of routes that can be received from peer
129.140.6.6 to 10000.
<Sysname> system-view
[Sysname] bgp 109
[Sysname-bgp] peer 129.140.6.6 as-number 110
[Sysname-bgp] peer 129.140.6.6 route-limit 10000
# In BGP-VPN instance view, set the maximum number of routes that can be
received from peer 129.140.6.6 to 10000 (the VPN has been created).
<Sysname> system-view
[Sysname] bgp 109
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer 129.140.6.6 as-number 110
[Sysname-bgp-vpn1] peer 129.140.6.6 route-limit 10000
peer { group-name | ip-address } route-policy route-policy-name { export | import }
undo peer { group-name | ip-address } route-policy route-policy-name { export |
import }
BGP view/BGP-VPN instance view
command to set the maximum number of routes that
command to restore the default.