Display Ripng Database - H3C MSR 20-20 Command Reference Manual

display ripng database

Syntax
View
Parameters
Description
Examples
Table 316 Description on the fields of the display ripng command
Field
Number of periodic updates sent
Number of trigger updates sent
display ripng process-id database
Any view
process-id: RIPng process number, in the range of 1 to 65535.
Use the
display ripng database
RIPng advertising database, which are sent in normal RIPng update messages.
# Display the active routes in the database of RIPng process 100.
<Sysname> display ripng 100 database
2001:7B::2:2A1:5DE/64,
cost 4, Imported
1:13::/120,
cost 4, Imported
1:32::/120,
cost 4, Imported
1:33::/120,
cost 4, Imported
100::/32,
via FE80::200:5EFF:FE04:3302, cost 2
3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B602, cost 2
3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B601, cost 2
3FFE:C00:C18:2::/64,
via FE80::200:5EFF:FE04:B602, cost 2
3FFE:C00:C18:3::/64,
via FE80::200:5EFF:FE04:B601, cost 2
4000:1::/64,
via FE80::200:5EFF:FE04:3302, cost 2
4000:2::/64,
via FE80::200:5EFF:FE04:3302, cost 2
Table 317 Description on fields of the display ripng database command
Field
2001:7B::2:2A1:5DE/64
via
cost
Imported
Description
Number of periodic updates sent
Number of triggered updates sent
command to display all active routes in the
Description
IPv6 destination address/prefix length
Next hop IPv6 address
Route metric value
Routes learnt from other routing protocols
1311