Igmp Enable - H3C MSR 20-20 Command Reference Manual

1350 C 88: IGMP C
HAPTER
Related command:
Example

igmp enable

Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION OMMANDS
igmp enable, and multicast routing-enable on page 1341.
# Enable IP multicast routing in the public instance and enter public instance IGMP
view.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] igmp
[Sysname-igmp]
# Enable IP multicast routing in VPN instance mvpn and enter IGMP view for VPN
instance mvpn.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] route-distinguisher 100:1
[Sysname-vpn-instance-mvpn] multicast routing-enable
[Sysname-vpn-instance-mvpn] quit
[Sysname] igmp vpn-instance mvpn
[Sysname-igmp-mvpn]
igmp enable
undo igmp enable
Interface view
None
Use the
igmp enable
Use the undo igmp enable
By default, IGMP is disabled on all interfaces.
Note that:
IP multicast must be enabled on the device before this command can take
■
effect.
IGMP must be enabled on an interface before any other IGMP feature
■
configured on the interface can take effect.
igmp.
# Enable IGMP on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] igmp enable
command to enable IGMP on the current interface.
command to disable IGMP on the current interface.