Display Ospfv3 Interface - H3C MSR 20-20 Command Reference Manual

display ospfv3 interface

Syntax
View
Parameters
Description
Examples
Table 298 Description on the fields of the display isofv3 command
Field
These LSAs' checksum Sum
Number of Unknown LSA
display ospfv3 interface [ interface-type interface-number | statistic ]
Any view
interface-type interface-number: Interface type and interface number.
statistic: Displays the interface statistics.
Use the display ospfv3 interface
information.
# Display OSPFv3 interface information.
<Sysname> display ospfv3 interface serial 2/0
Serial2/0 is up, line protocol is up
Interface ID 518
IPv6 Prefixes
FE80::1441:0:E213:1 (Link-Local Address)
2000:1::1
OSPFv3 Process (1), Area 0.0.0.1, Instance ID 0
Router ID 2.2.2.2, Network Type POINTOPOINT, Cost: 1562
Transmit Delay is 1 sec, State Point-To-Point, Priority 1
No designated router on this link
No backup designated router on this link
Timer interval configured, Hello: 10, Dead: 40, Wait: 40, Retransmit: 5
Hello due in 00:00:02
Neighbor Count is 1, Adjacent neighbor count is 1
Table 299 Description on the fields of the display ospfv3 interface command
Field
Interface ID
IPv6 Prefixes
OSPFv3 Process
Area
Instance ID
Router ID
Network Type
Cost
Transmit Delay
State
Priority
No designated router on this link
No backup designated router on this link
Description
Sum of all LSAs' checksum
Number of unknown LSAs
command to display OSPFv3 interface
Description
Interface ID
IPv6 Prefix
OSPFv3 Process
Area ID
Instance ID
Router ID
Network type of the interface
Cost value of the interface
Transmission delay of the interface
Interface state
DR priority of the interface
No designated router on this link
No backup designated router on this link
1283