H3C MSR 20-20 Command Reference Manual page 967

group-name: Name of a peer group to be displayed, a string of 1 to 47 characters.
log-info: Displays the log information of the specified peer.
verbose: Displays the detailed information of the peer/peer group.
Description Use the
Examples # Display the detailed information of the peer 10.110.25.20.
<Sysname> display bgp peer 10.110.25.20 verbose
Received: Total 5 messages, Update messages 1
Sent: Total 4 messages, Update messages 0
Maximum allowed prefix number: 4294967295
Threshold: 75%
Minimum time between advertisement runs is 30 seconds
Optional capabilities:
Route refresh capability has been enabled
Peer Preferred Value: 0
Routing policy configured:
No routing policy is configured
Table 218 Description on the fields of the display bgp peer command
Field
Peer
Local
Type
BGP version
remote router ID
BGP current state
BGP current event
BGP last state
Port
Configured: Active Hold Time
Keepalive Time
Received: Active Hold Time
Negotiated: Active Hold Time
command to display peer/peer group information.
display bgp peer
Peer: 10.110.25.20 Local: 2.2.2.2
Type: EBGP link
BGP version 4, remote router ID 1.1.1.1
BGP current state: Established, Up for 00h01m51s
BGP current event: RecvKeepalive
BGP last state: OpenConfirm
Port: Local - 1029
Configured: Active Hold Time: 180 sec
Received : Active Hold Time: 180 sec
Negotiated: Active Hold Time: 180 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Address family IPv4 Unicast: advertised and received
Remote - 179
Keepalive Time: 60 sec
Description
IP address of the peer
Local router ID
Peer type: Internal as IBGP peers and External as EBGP
peers.
BGP protocol version
Router ID of the peer
Current state of the peer
Current event of the peer
Last state of the peer
Port number of local router and its peer
Local holdtime interval
Local keepalive interval
Remote holdtime interval
Negotiated holdtime interval
967