Dual; Ipv6; Ipv6 Address - H3C MSR 20-20 Command Reference Manual

67

ipv6

Syntax
View
Parameter
Description
Example

ipv6 address

Syntax
View
Parameter
Description
D S
UAL TACK
C
OMMANDS
ipv6
undo ipv6
System view
None
Use the command to enable the IPv6 packet forwarding function.
ipv6
Use the command to disable the IPv6 packet forwarding function.
undo ipv6
By default, the function is disabled.
# Enable the IPv6 packet forwarding function.
<Sysname> system-view
[Sysname] ipv6
ipv6 address { ipv6-address prefix-length | ipv6-address/prefix-length }
undo ipv6 address [ ipv6-address prefix-length | ipv6-address/prefix-length ]
Interface view
ipv6-address: IPv6 address for the interface.
prefix-length: Length of the prefix in bits, in the range of 1 to 128.
Use the ipv6 address
unicast address for an interface.
Use the undo ipv6 address
By default, neither site-local addresses nor global unicast addresses are configured.
C
ONFIGURATION
command to configure a site-local address or global
command to remove the configuration.