Router-Id; Silent-Interface(Ospfv3 View) - H3C MSR 20-20 Command Reference Manual

router-id

Syntax
View
Parameters
Description
Related commands:
Examples

silent-interface(OSPFv3 view)

Syntax
View
Parameters
Description
<Sysname> system-view
[Sysname] OSPFv3
[Sysname-OSPFv3-1] preference 150
router-id router-id
undo router-id
OSPFv3 view
router-id: A 32-bit router ID, in IPv4 address format.
Use the
router-id
Use the undo router-id
Router ID is the unique identification of an OSPF process in an autonomous
system. An OSPFv3 process cannot run without a Router ID.
Make sure that different processes have different Router IDs.
ospfv3.
n
By configuring different router IDs for different processes, you can run multiple
OSPFv3 processes on a router.
# Configure the Router ID as 10.1.1.3 for OSPFv3 process 1.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] router-id 10.1.1.3
silent-interface { interface-type interface-number | all }
undo silent-interface { interface-type interface-number | all }
OSPFv3 view
interface-type interface-number: Interface type and number
all: Specifies all interfaces.
Use the silent-interface
sending OSPFv3 packets.
command to configure the OSPFv3 router ID.
command to remove a configured router ID.
command to disable the specified interface from
1305