Vam Client - H3C MSR 20-20 Command Reference Manual

1748 C 102: DVPN T
HAPTER
Related command:
Example

vam client

Syntax
View
Parameter
Description
Related command:
Example
C C
UNNEL ONFIGURATION OMMANDS
interface tunnel on page 884.
# Configure the DVPN tunnel mode.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] tunnel-protocol dvpn udp
vam client client-name
undo vam client
Tunnel interface view
client-name: Name of the VAM client, a case-insensitive string of 1 to 31
characters.
Use the
vam client
DVPN tunnel interface.
Use the undo vam client
By default, a DVPN tunnel interface references no VAM client.
Note that a DVPN tunnel interface can reference only one VAM client.
interface tunnel on page 884 and tunnel-protocol on page 887.
# Configure DVPN tunnel interface Tunnel0 to reference VAM client abc.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] vam client abc
command to specify the VAM client to be referenced on a
command to remove the VAM client.