Source-Lifetime (Ipv6 Pim View); Source-Policy (Ipv6 Pim View) - H3C MSR 20-20 Command Reference Manual

1496 C 93: IP 6 PIM C
HAPTER V

source-lifetime (IPv6 PIM view)

Syntax
View
Parameter
Description
Related command:
Example

source-policy (IPv6 PIM view)

Syntax
View
Parameter
Description
C
ONFIGURATION OMMANDS
source-lifetime interval
undo source-lifetime
IPv6 PIM view
interval: IPv6 multicast source lifetime in seconds, with an effective range of 1 to
65,535.
Use the
source-lifetime
lifetime.
Use the
undo source-lifetime
By default, the lifetime of an IPv6 multicast source is 210 seconds.
state-refresh-interval (IPv6 PIM view).
# Set the IPv6 multicast source lifetime to 200 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] source-lifetime 200
source-policy acl6-number
undo source-policy
IPv6 PIM view
acl6-number: Basic or advanced IPv6 ACL number, in the range of 2000 to 3999.
Use the
source-policy
Use the undo source-policy
data filter.
By default, no IPv6 multicast data filter is configured.
Note that:
If you specify a basic ACL, the device filters all the received IPv6 multicast
■
packets based on the source address, and discards packets that fail the source
address match.
command to configure the IPv6 multicast source
command to restore the default setting.
command to configure an IPv6 multicast data filter.
command to remove the configured IPv6 multicast