H3C MSR 20-20 Command Reference Manual page 1045

display isis interface, using the display isis interface verbose command
displays other interface related information, such as CSNP packets broadcast
intervals, Hello packets broadcast intervals and the number of invalid Hello
packets.
Examples # Display IS-IS enabled interface information.
<Sysname> display isis interface
Interface: Ethernet1/0
Id
001
# Display detailed IS-IS interface information.
<Sysname> display isis interface verbose
Interface: Ethernet1/0
Id IPV4.State
001
SNPA Address
IP Address
Secondary IP Address(es)
IPV6 Link Local Address
IPV6 Global Address(es)
Csnp Timer Value
Hello Timer Value
Hello Multiplier Value
Lsp Timer Value
Cost
Priority
Retransmit Timer Value
BFD
Table 235
Field
Interface
Id
IPV4.State
IPV6.State
MTU
Type
DIS
SNPA Address
IP Address
Secondary IP Address(es)
IPV6 Link Local Address
IPV6 Global Address(es)
Csnp Timer Value
Hello Timer Value
Interface information for ISIS(1)
---------------------------------
IPV4.State IPV6.State
Up
Interface information for ISIS(1)
---------------------------------
Up
Description on the fields of the display isis interface command
Description
Interface
Circuit ID
IPv4 state
IPv6 state
Interface MTU
Interface link type
Designated IS
Subnet access point address
Primary IP address
Secondary IP addresses
IPv6 link local address
IPv6 global address
Interval for sending CSNP packets
Interval for sending Hello packets
MTU
Down 1497
IPV6.State
Down
: 0000-5e19-6d00
: 192.168.0.1
:
:
:
: L1 10 L2
: L1 40 L2
: L1 3 L2
: L12 1
: L1 10 L2
: L1 64 L2
: L12 5
: Disabled
1045
Type DIS
L1/L2 No/No
MTU Type DIS
1497 L1/L2 No/No
10
10
30
10
64