If-Match Ip; If-Match Ip-Prefix - H3C MSR 20-20 Command Reference Manual

if-match ip

Syntax
View
Parameters
Description
Related commands:
Examples

if-match ip-prefix

Syntax
View
Parameters
Description
if-match ip { next-hop | route-source } { acl acl-number | ip-prefix ip-prefix-name }
undo if-match ip { next-hop | route-source } [ acl | ip-prefix ]
Routing policy view
next-hop: Matches next hop.
route-source: Matches source address.
acl acl-number: Matches an ACL with a number from 2000 to 2999.
ip-prefix ip-prefix-name: Matches an IP prefix list with a name being a string of 1
to 19 characters.
Use the if-match ip command to configure a next hop or source address match
criterion for IPv4 routes.
Use the
undo if-match ip
The match criterion is not configured by default.
route-policy.
# Create routing policy policy1 with node 10, matching mode as permit. Define
an if-match clause to permit routing information whose next hop address matches
IP prefix list p1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match ip next-hop ip-prefix p1
if-match ip-prefix ip-prefix-name
undo if-match ip-prefix
Routing policy view
ip-prefix-name: Matches an IP prefix list with a name being a string of 1 to 19
characters.
Use the
if-match ip-prefix
criterion.
Use the undo if-match ip-prefix
command to remove the match criterion.
command to configure an IP prefix list based match
command to remove the match criterion.
1209