mpls ldp remote-peer
Syntax
View
Parameter
Description
Related command:
Example
mpls ldp timer hello-hold
Syntax
View
Parameter
Description
Related command:
mpls ldp remote-peer remote-peer-name
undo mpls ldp remote-peer remote-peer-name
System view
remote-peer-name: Name of the remote peer, a case-insensitive string of 1 to 32
characters.
Use the
mpls ldp remote-peer
enter MPLS LDP remote peer view.
Use the
undo mpls ldp remote-peer
remote-ip.
# Create a remote peer entity named BJI.
<Sysname> System-view
[Sysname] mpls ldp remote-peer BJI
[Sysname-mpls-ldp-remote-bji]
mpls ldp timer hello-hold value
undo mpls ldp timer hello-hold
Interface view/MPLS LDP remote peer view
value: Length of time for the Hello timer, in the range 1 to 65,535 seconds.
Use the
mpls ldp timer hello-hold
Use the
undo mpls ldp timer hello-hold
In interface view, you configure the link Hello timer; in MPLS LDP remote peer
view, you configure the targeted Hello timer.
By default, the value of the link Hello timer is 15 seconds, while that of the
targeted Hello timer is 45 seconds.
n
Changing the values of the Hello timers does not affect any existing session.
mpls ldp (system view), mpls ldp (interface view).
command to create a remote peer entity and
command to remove a remote peer entity.
command to set the Hello timers.
command to restore the defaults.
1551