Display Tunnel-Info - H3C MSR 20-20 Command Reference Manual

1602 C 96: MPLS TE C
HAPTER

display tunnel-info

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
Table 419 Description on the fields of the display ospf traffic-adjustment command
Field
Type
Neighbor ID
Cost
State
Neighbor Ip Address
Cost Type
Hold time
display tunnel-info { tunnel-id | all | statistics }
Any view
tunnel-id: Specifies a tunnel ID, in the range 1 to FFFFFFFE. If a tunnel is specified,
only information about this tunnel will be displayed.
all: Display information about all tunnels.
statistics: Displays statistics about tunnels.
Use the
display tunnel-info
# Display information about all tunnels.
<Sysname> display tunnel-info all
Tunnel ID
------------------------------------------------------
0x1100002
# Display statistics about tunnels.
<Sysname> display tunnel-info statistics
Tunnel Allocation Method :
Avail Tunnel ID Value :
Total Tunnel ID Allocated :
LSP :
GRE :
CRLSP :
LOCAL IFNET :
MPLS LOCAL IFNET :
Table 420 Description on the fields of the display tunnel-info statistics command
Field
Tunnel Allocation Method
Avail Tunnel ID Value
Total Tunnel ID Allocated
Description
Approach to automatic route advertisement: IGP shortcut or
forwarding adjacency
Remote neighbor ID
Cost
State: up or down
Neighbor IP address
Cost type
Hold time
command to display information about tunnels.
Type Destination
lsp 2.2.2.2
GLOBAL
262144
1
1
0
0
0
0
Description
The way that tunnels are allocated
Available tunnel IDs. Available tunnel ID values vary by
device.
Total number of tunnel IDs that have been allocated