1416
C
90: PIM C
HAPTER
Related command:
Example
pim require-genid
Syntax
View
Parameter
Description
Example
pim sm
Syntax
View
Parameter
Description
C
ONFIGURATION
OMMANDS
Use the
undo pim holdtime join-prune
setting.
By default, the join/prune timeout time is 210 seconds.
holdtime assert (PIM view), pim holdtime assert, and holdtime join-prune
(PIM view).
# Set the join/prune timeout time to 280 seconds on Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim holdtime join-prune 280
pim require-genid
undo pim require-genid
Interface view
None
Use the
pim require-genid
without Generation_ID.
Use the
undo pim require-genid
configuration.
By default, hello messages without Generation_ID are accepted.
# Enable Ethernet1/0 to reject hello messages without Generation_ID.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim require-genid
pim sm
undo pim sm
Interface view
None
Use the
pim sm
command enable rejection of hello messages
command to restore the default
command to enable PIM-SM.
command to restore the default