Ipv6 Icmpv6 Multicast-Echo-Reply Enable; Ipv6 Mtu - H3C MSR 20-20 Command Reference Manual

Parameter
Description
Example

ipv6 icmpv6 multicast-echo-reply enable

Syntax
View
Parameters
Description
Examples

ipv6 mtu

Syntax
View
bucket bucket-size: Number of tokens in a token bucket, in the range of 1 to 200.
ratelimit interval: Update period of the token bucket in milliseconds, in the range
of 0 to 2,147,483,647. The update period "0" indicates that the number of
ICMPv6 error packets sent is not restricted.
Use the
ipv6 icmp-error
token bucket.
Use the
undo ipv6 icmp-error
By default, the size is 10 and the update period is 100 milliseconds. That is, at
most 10 ICMPv6 error packets can be sent within these 100 milliseconds.
# Set the capacity of the token bucket to 50 and the update period to 100
milliseconds.
<Sysname> system-view
[Sysname] ipv6 icmp-error bucket 50 ratelimit 100
ipv6 icmpv6 multicast-echo-reply enable
undo ipv6 icmpv6 multicast-echo-reply
System view
None
Use the ipv6 icmpv6 multicast-echo-reply enable
sending of multicast echo replies.
Use the
undo ipv6 icmpv6 multicast-echo-reply
sending of multicast echo replies.
By default, the device is disabled from sending multicast echo replies.
# Enable sending of multicast echo replies.
<Sysname> system-view
[Sysname] ipv6 icmpv6 multicast-echo-reply enable
ipv6 mtu mtu-size
undo ipv6 mtu
Interface view
command to configure the size and update period of a
command to restore the defaults.
command to enable
command to disable
849