Description
Related command:
Example
pim ipv6 timer graft-retry
Syntax
View
Parameter
Description
Example
pim ipv6 timer hello
Syntax
View
Parameter
Use the
pim ipv6 state-refresh-capable
feature on the interface.
Use the
undo pim ipv6 state-refresh-capable
fresh feature.
By default, the state refresh feature is enabled.
state-refresh-interval (IPv6 PIM view), state-refresh-rate-limit (IPv6 PIM
view), and state-refresh-hoplimit.
# Disable state refresh on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] undo pim ipv6 state-refresh-capable
pim ipv6 timer graft-retry interval
undo pim ipv6 timer graft-retry
Interface view
interval: Graft retry period in seconds, with an effective range of 1 to 65,535.
Use the
pim ipv6 timer graft-retry
period.
Use the
undo pim ipv6 timer graft-retry
setting.
By default, the graft retry period is 3 seconds.
# Set the graft retry period to 80 seconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 timer graft-retry 80
pim ipv6 timer hello interval
undo pim ipv6 timer hello
Interface view
interval: Hello interval in seconds, with an effective range of 1 to 2,147,483,647.
command to enable the state fresh
command to disable the state
command to configure the graft retry
command to restore the default
1491