1146
C
76: OSPF C
HAPTER
ospf dr-priority
Syntax
View
Parameters
Description
Examples
ospf mib-binding
Syntax
View
Parameters
Description
Examples
C
ONFIGURATION
OMMANDS
<Sysname> system-view
[Sysname] interface serial2/0
[Sysname-Serial2/0] ospf cost 65
ospf dr-priority priority
undo ospf dr-priority
Interface view
priority: DR Priority of the interface, in the range 0 to 255.
Use the
ospf dr-priority
interface.
Use the
undo ospf dr-priority
By default, the priority is 1.
The bigger the value is, the higher the priority.
This configuration is not supported on the NULL interface.
# Set the DR priority on the current interface to 8.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ospf dr-priority 8
ospf mib-binding process-id
undo ospf mib-binding
System view
process-id: OSPF process ID, in the range 1 to 65535.
Use the
ospf mib-binding
Use the
undo ospf mib-binding
By default, MIB operation is bound to the first enabled OSPF process.
# Bind OSPF process 100 to MIB operation.
command to set the priority for DR/BDR election on an
command to restore the default value.
command to bind an OSPF process to MIB operation.
command to restore the default.