Summary; Timers - H3C MSR 20-20 Command Reference Manual

1182 C 77: RIP C
HAPTER

summary

Syntax
View
Parameters
Description
Related commands:
Examples

timers

Syntax
View
Parameters
C
ONFIGURATION OMMANDS
<Sysname> system-view
[Sysname] rip 100
[Sysname-rip-100] silent-interface all
[Sysname-rip-100] undo silent-interface ethernet1/0
[Sysname-rip-100] network 131.108.0.0
summary
undo summary
RIP view
None
Use the summary
masks are used to advertise summary routes so as to reduce the size of routing
tables.
Use the
undo summary
that all subnet routes can be broadcasted.
By default, automatic RIP-2 summarization is enabled.
Enabling automatic RIP-2 summarization can reduce the size of the routing table
to enhance the scalability and efficiency of large networks.
rip version.
# Enable RIP-2 automatic summarization.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1] summary
timers { garbage-collect garbage-collect-value | suppress suppress-value | timeout
timeout-value | update update-value }*
undo timers { garbage-collect | suppress | timeout | update } *
RIP view
garbage-collect-value: Garbage-collect timer time in seconds, in the range of 1 to
3600.
suppress-value: Suppress timer time in seconds, in the range of 0 to 3600.
command to enable automatic RIP-2 summarization. Natural
command to disable automatic RIP-2 summarization so