Mpls Rsvp-Te; Mpls Rsvp-Te Authentication - H3C MSR 20-20 Command Reference Manual

1606 C 96: MPLS TE C
HAPTER

mpls rsvp-te

Syntax
View
Parameter
Description
Example

mpls rsvp-te authentication

Syntax
View
Parameter
C
ONFIGURATION OMMANDS
mpls rsvp-te
undo mpls rsvp-te
MPLS view, interface view
None
Use the
mpls rsvp-te
Use the
undo mpls rsvp-te
By default, RSVP-TE is disabled.
You must enable RSVP-TE before you can configure other RSVP-TE features.
Before enabling RSVP-TE, enable MPLS in both system view and interface view.
Disabling RSVP-TE in MPLS view disables RSVP-TE on interfaces.
# Enable RSVP-TE on current node.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te
# Enable RSVP-TE on interface Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] mpls rsvp-te
mpls rsvp-te authentication { cipher | plain } auth-key
undo mpls rsvp-te authentication
Interface view
cipher: Indicates that the specified authentication key is a cipher-text key.
plain: Indicates that the specified authentication key is a plain-text key.
auth-key: Authentication key, case sensitive. Input in plain text, the string for it is 8
to 16 characters in length; input in cipher text, the string for it is 24 characters in
length. If the plain keyword is specified, it can only be input in plain text. If the
cipher keyword is specified, it can be input in both plain text or in cipher text.
command to enable RSVP-TE.
command to disable RSVP-TE.