Vam Client Name - H3C MSR 20-20 Command Reference Manual

View
Parameter
Description
Related command:
Example

vam client name

Syntax
View
Parameter
Description
Example
System view
all: Specifies all configured VAM clients.
name client-name: Specifies an existing VAM client. The client-name argument
indicates the name of the VAM client and is a case-insensitive string of 1 to 31
characters. Valid characters are A to Z, a to z, 0 to 9, and ".".
Use the vam client enable
VAM client.
Use the
undo vam client enable
specified VAM client.
By default, all VAM clients are disabled.
vam client name and client enable.
# Enable the VAM client named spoke.
<Sysname> system-view
[Sysname] vam client enable name spoke
vam client name client-name
undo vam client name client-name
System view
client-name: Name of a VAM client, a string of 1 to 31 case-insensitive characters.
Valid characters are A through Z, a through z, 0 through 9, hyphen (-), and dot (.).
Use the vam client command to create a VAM client and enter VAM client view,
or enter VAM client view directly if the VAM client already exists.
Use the
undo vam client
By default, no VAM client is configured.
Note that you are unable to directly delete a VAM client that is already applied on
an interface.
# Create a VAM client named abc.
<Sysname> system-view
[Sysname] vam client name abc
[Sysname-vam-client-name-abc]
command to enable all VAM clients or a specified
command to disable all VAM clients or a
command to delete the specified VAM client.
1737