71
bandwidth-based-sharing
Syntax
View
Parameters
Description
Examples
display ip routing-table
Syntax
View
IP R
OUTING
bandwidth-based-sharing
undo bandwidth-based-sharing
System view
None
Use the
bandwidth-based-sharing
sharing.
Use the
undo bandwidth-based-sharing
bandwidth-based load sharing.
By default, bandwidth-based load sharing is disabled.
If multiple outbound interfaces/nexthops to a destination are found during
forwarding:
When bandwidth-based load sharing is disabled, the packets are forwarded
■
through all these interfaces in turn.
When bandwidth-based load sharing is enabled, the device calculates the
■
packet forwarding proportion for each interface based on the bandwidths and
then determines through which interfaces to forward the subsequent packets
(the number of packets already forwarded through these interfaces is
considered).
# Enable bandwidth-based load sharing.
<Sysname> system-view
[Sysname] bandwidth-based-sharing
display ip routing-table [ vpn-instance vpn-instance-name ] [ verbose ] | { begin |
exclude | include } regular-expression ]
Any view
T
C
ABLE
OMMANDS
command to enable bandwidth-based load
command to disable