Tunnel Password; Tunnel Timer Hello - H3C MSR 20-20 Command Reference Manual

tunnel password

Syntax
View
Parameter
Description
Example

tunnel timer hello

Syntax
View
Parameter
Description
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel name itsme
tunnel password { simple | cipher } password
undo tunnel password
L2TP group view
simple: Displays the password in plain text.
cipher: Displays the password in cipher text.
password: Password for tunnel authentication, case sensitive. If you specify the
simple keyword, you can enter a password only in plain text. If you specify the
cipher keyword, you can enter a password in either plain text or cipher text. A
plain text password is a string of 1 to 16 characters that contains no space, for
example, aabbcc. A cipher text password consists of 24 characters, for example,
_(TT8F)Y5SQ=^Q'MAF4<1!!.
Use the
tunnel password
authentication.
Use the
undo tunnel password
By default, the password for tunnel authentication is null.
# Set the password for tunnel authentication to yougotit, specifying to display the
password in cipher text.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel password cipher yougotit
tunnel timer hello hello-interval
undo tunnel timer hello
L2TP group view
hello-interval: Interval at which the LAC or the LNS sends Hello packets when
receiving no packets, in the range of 60 to 1,000 seconds.
Use the
tunnel timer hello
packets in a tunnel.
command to specify the password for tunnel
command to remove the configuration.
command to set the hello interval in sending hello
1767