Display Bgp Ipv6 Routing-Table Statistic; Filter-Policy Export(Ipv6 Address Family View) - H3C MSR 20-20 Command Reference Manual

1238 C 82: IP 6 BGP C
HAPTER V
Parameters
Description
Examples

display bgp ipv6 routing-table statistic

Syntax
View
Parameters
Description
Examples

filter-policy export(IPv6 address family view)

Syntax
View
Parameters
C
ONFIGURATION OMMANDS
as-regular-expression: AS regular expression.
Use the display bgp ipv6 routing-table regular-expression
display the routes permitted by the specified AS regular expression.
# Display routing information matching the specified AS regular expression.
<Sysname> display bgp ipv6 routing-table regular-expression ^100
BGP Local router ID is 20.20.20.1
Status codes: * - valid, > - best, d - damped,
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
*> Network : 50:50::
NextHop : 10:10::10:1
PrefVal : 0
MED : 0
Path/Ogn: 100 i
Refer to Table 291 for description on the fields above.
display bgp ipv6 routing-table statistic
Any view
None
Use the
display bgp ipv6 routing-table statistic
BGP routing statistics.
# Display IPv6 BGP routing statistics.
<Sysname> display bgp ipv6 routing-table statistic
Total Number of Routes: 1
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ protocol
process-id ]
undo filter-policy export [ protocol process-id ]
IPv6 address family view
acl6-number: Specifies the number of an ACL6 used to match against the
destination of routing information. The number is in the range 2000 to 3999.
i - internal, s - suppressed, S - Stale
command to
PrefixLen : 64
LocPrf :
Label : NULL
command to display IPv6