H3C MSR 20-20 Command Reference Manual page 1816

1816 C 112: PQ C
HAPTER
Description
Related commands:
Examples
C
ONFIGURATION OMMANDS
By default, the length values of the queues are as follows:
The default length value of the top queue is 20.
The default length value of the middle queue is 40.
The default length value of the normal queue is 60.
The default length value of the bottom queue is 80.
Use the
qos pql queue
that can wait in each of the priority queues, or the length of a PQ.
Use the
undo qos pql queue
PQ length.
If a queue is full, any newly incoming packet will be dropped.
qos pql default-queue, qos pql inbound-interface, qos pql protocol, qos
pq.
# Specify the maximum number of packets waiting in the top priority queue 10 to
10.
<Sysname> system-view
[Sysname] qos pql 10 queue top queue-length 10
command to specify the maximum number of packets
command to restore to the default value of each