Description
Examples
ipv6-family
Syntax
View
Parameters
Description
Examples
network (IPv6 address family view)
Syntax
med-value: Applies the MED value to redistributed routes. The value is in the range
0 to 4294967295. If not specified, the cost of the redistributed route is used as its
MED in the IPv6 BGP routing domain.
route-policy-name: Name of a routing policy used to filter redistributed routes, a
string of 1 to 19 characters.
Use the
import-route
protocol.
Use the
undo import-route
By default, IPv6 BGP does not redistribute routes from any routing protocol.
The routes redistributed using the import-route command has the incomplete
origin attribute.
# Redistribute routes from RIPng 1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] import-route ripng 1
ipv6-family
undo ipv6-family
BGP view
None
Use the
ipv6-family
command to enter IPv6 address family view.
Use the
undo ipv6-family
IPv4 BGP unicast view is the default.
# Enter IPv6 address family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
network ipv6-address prefix-length [ short-cut | route-policy route-policy-name ]
undo network ipv6-address prefix-length [ short-cut ]
command to redistribute routes from another routing
command to remove the configuration.
command to remove all configurations from the view.
1241