H3C MSR 20-20 Command Reference Manual page 1102

1102 C 75: IS-IS D
HAPTER
C
EBUGGING OMMANDS
Table 261 Description on the fields of the debugging isis update-packet command
Field
pdu length: pduLen
Adjacency Usage: adjType
Fast Flood levelType LSP before SPF
RECV: Rxed IS-IS PDU of pduLen which is
greater than receive size(receiveLen)
Err!Lsp fragment exceeding Max limit !!!
UPDT: Circuit up failed
UPDT: Circuit not brought down
Fast Flood L1/L2 LSP when FastFlood timer
expired.
UPDT: Error! Txmission of Csnp on P2Pckt
failed
UPDT: Rx Man area change
UPDT: Err! Zero Lsp Desc not present
UPDT: Err, Match not found for the area addr
option
UPDT: Rx att flag change
UPDT: Fatal! Failed to flood Lsp with oload bit
set
UPDT: LSDB Enters Normal Over Load State
UPDT: update process recovered from Normal
Oload !
UPDT: Rx IP change from config
UPDT: v4/v6 Default Info Origination Denied
by Policy.
UPDT: Default Info Origination Permitted by
Policy.
UPDT: Adj Up failed
UPDT: Err1 Processing of Adj down not
successful !. SysType sysLevel Usage adjType
UPDT: Learnt Area Addr change
UPDT: MinLspGen Timer hasn't expired. Not
generating Lsp
UPDT: Err! Unexpected Level levelType
UPDT: Lsp with Invalid IS Nbr Id
UPDT: Max Area Mismatch.
UPDT: Invalid LSP specific hdr !
UPDT: Received LSP Not processed on
Broadcast Circuit due to Low Memory, LSP
Dropped
Description
Length of received PDU
Adjacency type
LSPs are fast-flooded before SPF calculation.
levelType: LSP level, which can be L1 or L2.
Received an IS-IS PDU with a pduLen greater
than receive size (receiveLen).
LSP fragment number exceeds the maximum
limit.
Failed to bring up the interface.
Failed to bring down the interface.
Fast-flood L1/L2 LSPs upon expiration of the
Fastflood timer.
Transmission of CSNP packets on a P2P
network failed.
The area address in the received LSP changed.
Error! Zero LSP fragment is not present.
No match is found for the area address in the
L1 LSP.
ATT flag changed in the received LSP.
Failed to flood the LSP because overload bit is
set.
The LSDB enters the "overloaded" state.
The LSDB leaves the "overloaded" state.
IP reachable TLV in the received LSP changed.
Default route information failed to pass the
policy and therefore was not sent in an LSP.
Default route information passed the policy
and therefore was sent in an LSP.
Failed to bring up the adjacency.
The L1/L2/L12 system failed to process the
L1/L2/L12 adjacency down event.
The area address in the received LSP is
changed.
The minimum LSP generation interval has not
expired, so no new LSPs can be generated.
The type of the received LSP is invalid.
levelType: LSP level, L1 or L2
The received LSP has an invalid neighbor
system ID.
The maximum area address number in the
received LSP does not match that of the
current device.
Invalid received LSP packet header
The received LSP was dropped due to
insufficient memory of the broadcast
interface.