Peer Substitute-As (Ipv6 Address Family View) - H3C MSR 20-20 Command Reference Manual

View
Parameters
Description
Examples

peer substitute-as (IPv6 address family view)

Syntax
View
Parameters
Description
Examples
undo peer { ipv6-group-name | ipv6-address } route-update-interval
IPv6 address family view
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
seconds: Specifies the minimum interval for sending the same update to a peer
(group) from 5 to 600 seconds.
Use the
peer route-update-interval
sending the same update to a peer/peer group.
Use the
undo peer route-update-interval
By default, the interval is 15 seconds for the IBGP peer, and 30 seconds for the
EBGP peer.
# Specify the interval for sending the same update to the peer 1:2::3:4 as 10
seconds.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100
[Sysname-bgp-af-ipv6] peer 1:2::3:4 route-update-interval 10
peer { ipv6-group-name | ipv6-address } substitute-as
undo peer { ipv6-group-name | ipv6-address } substitute-as
IPv6 address family view
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
Use the
peer substitute-as
AS number of a peer/peer group in the AS_PATH attribute.
Use the
undo peer substitute-as
The substitution is not configured by default.
# Substitute the local AS number for the AS number of peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
command to specify the interval for
command to restore the default.
command to substitute the local AS number for the
command to remove the configuration.
1259