Mpls Rsvp-Te Timer Hello; Mpls Rsvp-Te Timer Refresh - H3C MSR 20-20 Command Reference Manual

Parameters
Description
Examples

mpls rsvp-te timer hello

Syntax
View
Parameter
Description
Related command:
Example

mpls rsvp-te timer refresh

Syntax
View
restart-time: RSVP-TE GR restart interval in seconds, in the range 60 to 300.
Use the
mpls rsvp-te timer graceful-restart restart
RSVP-TE GR restart interval.
Use the
undo mpls rsvp-te timer graceful-restart restart
restore the default.
By default, the RSVP-TE GR restart interval is 120 seconds.
# Set the RSVP-TE GR restart interval to 200 seconds.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te timer graceful-restart restart 200
mpls rsvp-te timer hello timevalue
undo mpls rsvp-te timer hello
MPLS view
timevalue: Hello interval, in the range 1 to 60 seconds.
Use the
mpls rsvp-te timer hello
Use the undo mpls rsvp-te timer hello
The default hello interval is three seconds.
Before configuring this command, enable the hello mechanism in MPLS view.
mpls rsvp-te hello, mpls rsvp-te hello-lost.
# Set the hello interval to five seconds.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te timer hello 5
mpls rsvp-te timer refresh timevalue
undo mpls rsvp-te timer refresh
MPLS view
command to set the
command to configure the hello interval.
command to restore the default.
1613
command to