Multicast Ipv6 Routing-Enable - H3C MSR 20-20 Command Reference Manual

1440 C 91: IP 6 M
HAPTER V
Description
Related command:
Example

multicast ipv6 routing-enable

Syntax
View
Parameter
Description
Example
R F
ULTICAST OUTING AND ORWARDING
Use the multicast ipv6 minimum-hoplimit
minimum hop limit required for an IPv6 multicast packet to be forwarded.
Use the
undo multicast minimum-hoplimit
default.
By default, the minimum hop limit required for an IPv6 multicast packet to be
forwarded is 1.
display multicast ipv6 minimum-hoplimit.
# Set the minimum hop limit required for an IPv6 multicast packet to be forwarded
by Ethernet 1/0 to 8.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] multicast ipv6 minimum-hoplimit 8
multicast ipv6 routing-enable
undo multicast ipv6 routing-enable
System view
None
Use the
multicast ipv6 routing-enable
routing.
Use the undo multicast ipv6 routing-enable
multicast routing.
IPv6 multicast routing is disabled by default.
Note that:
You must enable IPv6 multicast routing before you can carry out other Layer 3
■
IPv6 multicast commands.
The device does not forward any IPv6 multicast packets before IPv6 multicast
■
routing is enabled.
# Enable IPv6 multicast routing.
<Sysname> system-view
[Sysname] multicast ipv6 routing-enable
C C
ONFIGURATION OMMANDS
command to enable IPv6 multicast
command to configure the
command to restore the system
command to disable IPv6