Data Protect Router-Unix; Data Read Block - H3C MSR 20-20 Command Reference Manual

data protect router-unix

Syntax
View
Parameters
Description
Example

data read block

Syntax
View
Parameters
Description
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] bind vpn-instance vpn1
data protect router-unix
undo data protect router-unix
Terminal template view
None
Use the
data protect router-unix
the router and the FEP.
Use the undo data protect
By default, data encryption is disabled between the router and the FEP.
In terminal access, you can configure whether to encrypt the data exchanged
between the router and the FEP. The supported encryption algorithm is AES
(advanced encryption standard) and the supported key length is 128-bit.
# Enable the data encryption between the router and the FEP.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] data protect router-unix
data read block
undo data read block
Terminal template view
None
Use the
data read block
Use the undo data read block
By default, data read blocking is disabled.
Note that, if data read blocking is enabled, when the router fails to send data from
the terminal, the router stops receiving data from the terminal until the data is
sent successfully.
command to enable data encryption between
command to restore the default.
command to enable data read blocking.
command to restore the default.
901