Reset Mpls Rsvp-Te Statistics; Reset Mpls Te Auto-Bandwidth Adjustment Timers; Static-Cr-Lsp Egress - H3C MSR 20-20 Command Reference Manual

reset mpls rsvp-te statistics

Syntax
View
Parameter
Description
Example

reset mpls te auto-bandwidth adjustment timers

Syntax
View
Parameter
Description
Example

static-cr-lsp egress

Syntax
reset mpls rsvp-te statistics { global | interface [ interface-type interface-number ]
User view
global: Clears statistics about global RSVP-TE.
interface: Clears statistics about RSVP-TE for all interfaces.
interface interface-type interface-number: Specifies an interface by its type and
number. If an interface is specified, the command clears the statistics about
RSVP-TE for the interface.
Use the reset mpls rsvp-te statistics
RSVP-TE.
# Clear statistics about global RSVP-TE.
<Sysname> reset mpls rsvp-te statistics global
reset mpls te auto-bandwidth adjustment timers
User view
None
Use the
reset mpls te auto-bandwidth adjustment timers
reset the automatic bandwidth adjustment function.
This command clears information about output rate sampling and the remaining
time for next bandwidth optimization.
n
Support for this command varies by default.
# Reset the automatic bandwidth adjustment function.
<Sysname> reset mpls te auto-bandwidth adjustment timers
static-cr-lsp egress tunnel-name incoming-interface interface-type interface-number
in-label in-label-value [ lsrid ingress-lsr-id tunnel-id tunnel-id ]
undo static-cr-lsp egress tunnel-name
command to clear statistics about
1639
command to