H3C MSR 20-20 Command Reference Manual page 1101

Table 257 Description on the fields of the debugging isis spf-event command
Field
SPF—PRC:Received L sysLevel System Change
Event for msgString, Change = chgEvent
SPF—PRC:Inform L sysLevel Change to Area
and Route, Total Change Node:totalNum
ISIS—procId—AREA
RT Calculation: Elapsed time: millSeconds
Milliseconds
ISIS—procId—DEC—PRC
DEC—PRC :Processing L sysLevel LSPs of
System : sourceId, Change Type = chgType
Table 258 Description on the fields of the debugging isis spf-summary command
Field
FWDB-LIMIT::Need to Process ISIS
MaxRouteLimit Resume.
Table 259 Description on the fields of the debugging isis spf-timer command
Field
SPF-TRIG: SPF Scheduled Event (before):
trigEvent, Run Level: levelType.
Table 260 Description on the fields of the debugging isis traffic-eng { advertisement |
event } command
Field
Received Extended IS Reach information from
LSP
TE: Get TE Info for Circuit %s Failed in Circ
Enable.
TE: Add If Te info failed
TE: Rm Traffic Engineering change status to
enable.
TE: ISIS Update Te LinkInfo In Local TeDb.
Description
SpfNode change was sent to PRC for
processing.
sysLevel: system level
msgString: Node change event type.
Inform system ID changes to the area address
and route update module
sysLevel: system level
totalNum: total node changes
Area address-related information and
ATT-related information
procId: IS-IS process ID.
Route calculation time elapsed in milliseconds
Information of PRC route updates
Processing the LSPs of the changed system
node.
sysLevel: system level
sourceId: source system ID
chgType: change type
Description
Restore the maximum routes in the route
table in the case that the route table is not
full.
Description
SPF schedule starts. Triggered event and run
level are displayed.
levelType: Run level of SPF calculation
Description
An LSP with the TLV of an extended reachable
address was received.
Tunnel interface has been disabled; therefore,
getting tunnel interface information failed.
Adding TE interface information failed.
RM TE status changes to "enabled".
ISIS updates TE link information in the local TE
database.
1101