Client Enable; Display Vam Client - H3C MSR 20-20 Command Reference Manual

100

client enable

Syntax
View
Parameter
Description
Related command:
Example

display vam client

Syntax
View
VAM C
LIENT
C
OMMANDS
client enable
undo client enable
VAM client view
None
Use the
client enable
Use the
undo client enable
By default, the VAM client function is disabled.
vam client name, and vam client enable.
# Enable the VAM client function on client named spoke.
<Sysname> system-view
[Sysname] vam client name spoke
[Sysname-vam-client-name-spoke] client enable
display vam client { address-map | fsm } [ client-name ]
Any view
C
ONFIGURATION
command to enable the VAM client function.
command to restore the default.