H3C MSR 20-20 Command Reference Manual page 1292

1292 C 84: IP 6 OSPF
HAPTER V
Parameters
Description
Examples
3 C C
V ONFIGURATION OMMANDS
process-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
ipv6-address: IPv6 address prefix.
prefix-length: Prefix length, in the range 0 to 128.
abr-routes: Specifies to display routes to ABR.
asbr-routes: Specifies to display routes to ASBR.
all: Specifies to display all routes.
statistics: Specifies to display the statistics of OSPFv3 routing table.
Use the
display ospfv3 routing
information.
If no process is specified, routing table information of all OSPFv3 processes is
displayed.
# Display OSPFv3 routing table information.
<Sysname> display ospfv3 routing
E1 - Type 1 external route,
E2 - Type 2 external route,
OSPFv3 Router with ID (1.1.1.1) (Process 1)
------------------------------------------------------------------------
*Destination: 2001::/64
Type : I
NextHop : directly-connected
Table 311 Description on the fields of the display ospfv3 routing command
Field
Destination
Type
Cost
Next-hop
Interface
# Display the statistics of OSPFv3 routing table.
<Sysname> display ospfv3 routing statistics
OSPFv3 Router with ID (1.1.1.1) (Process 1)
Intra-area-routes
Inter-area-routes
External-routes
Table 312 Description on the fields of the display ospfv3 routing statistics command
Field
Intra-area-routes
Inter-area-routes
External-routes
command to display OSPFv3 routing table
IA - Inter area route,
* - Selected route
OSPFv3 Routing Statistics
: 1
: 0
: 0
Description
Number of Intra-area-routes
Number of inter-area routes
Number of external routes
I - Intra area route
Cost : 1
Interface: Eth1/0
Description
Destination network segment
Route type
Route cost value
Next hop address
Outbound interface