Mpls L2Vpn; Mpls L2Vpn Vpn-Name - H3C MSR 20-20 Command Reference Manual

Example

mpls l2vpn

Syntax
View
Parameter
Description
Example

mpls l2vpn vpn-name

Syntax
View
Parameter
# Create a Martini MPLS L2VPN connection.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] mpls l2vc 2.2.2.9 999
mpls l2vpn
undo mpls l2vpn
System view
None
Use the command to enable MPLS L2VPN.
mpls l2vpn
Use the undo mpls l2vpn
L2VPN configurations.
You must use the mpls l2vpn command to enable MPLS L2VPN before
configuring the other L2VPN commands.
# Enable MPLS L2VPN.
<Sysname> system-view
[Sysname] mpls l2vpn
mpls l2vpn vpn-name [ encapsulation { atm-aal5 | ethernet | fr | hdlc | ppp | vlan }
[ control-word | no-control-word ] ]
undo mpls l2vpn vpn-name
System view/MPLS L2VPN view
vpn-name: Name for the VPN, a case insensitive string of 1 to 31 characters that
cannot include the character of "-". It is used to identify a VPN uniquely on a PE.
encapsulation: Specifies the VPN encapsulation type.
atm-aal5: Uses ATM AAL5 encapsulation.
ethernet: Uses Ethernet encapsulation.
fr: Uses FR encapsulation.
hdlc: Uses HDLC encapsulation.
command to disable MPLS L2VPN and delete all
1665