Parameters
Description
Examples
multicast-domain switch-group-pool
Syntax
View
Parameters
Description
switch-delay: MDT switching delay in seconds, namely the delay time for multicast
traffic to be switched from the share-MDT to the switch-MDT, in the range of 3 to
60.
Use the
multicast-domain switch-delay
switching delay.
Use the
undo multicast-domain switch-delay
system default.
By default, the MDT switching delay time is 5 seconds.
# Set the MDT switching delay to 20 seconds in VPN instance mvpn.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] multicast-domain switch-delay 20
multicast-domain switch-group-pool switch-group-pool { mask | mask-length }
[ threshold threshold-value | acl acl-number ] *
undo multicast-domain switch-group-pool
VPN instance view
switch-group-pool: The start address of the switch-group-pool, in the range of
224.0.1.0 to 239.255.255.255.
mask: Mask for addresses in the switch-group-pool, in the range of
255.255.255.0 to 255.255.255.255, meaning the switch-group-pool contains 1
to 256 group addresses.
mask-length: Mask length for addresses in the switch-group-pool, in the range of
24 to 32, meaning the switch-group-pool contains 1 to 256 group addresses.
threshold-value: Traffic rate threshold that will trigger MDT switching, in units of
kbps. The effective range is 0 to 4194304.
acl-number: Advanced ACL number, in the range of 3000 to 3999. An advanced
ACL is used to define the (S, G) entry or entries to which the configured MDT
switching condition will apply. If you do not specify an ACL, the configured MDT
switching condition will apply to all (S, G) entries.
Use the
multicast-domain switch-group-pool
address range of the switch-group-pool and the switching condition.
Use the
undo multicast-domain switch-group-pool
system default.
command to configure the MDT
command to restore the
command to configure the
command to restore the
1511