H3C MSR 20-20 Command Reference Manual page 1096

1096 C 75: IS-IS D
HAPTER
C
EBUGGING OMMANDS
Table 253 Description on the fields of the debugging isis receiving-packet-content
command
Field
Rxed pduLevel CSNP From sourceId
(circuitName).
** ** ** ** ** ** ** ** ** ** ** ** ** **
** **
Rxed pduLevel PSNP From sourceId
(circuitName).
** ** ** ** ** ** ** ** ** ** ** ** ** **
** **
Table 254 Description on the fields of the debugging isis self-originate-update command
Field
UPDT: RESET REQUIRED.
UPDT: Circuit IPv4/IPv6 Up circName
UPDT: Circuit IPv4/IPv6 Down circName
UPDT: Circuit Cost change process failed
UPDT: Circuit Ipv4/v6 Addr add ipAddress
UPDT: Circuit Ipv4/v6 Addr Del ipAddress
UPDT: Rxed levelType Default cost Change
INTELLITMR: Starting a lspLevel LSP Timer for
LSP Generation.
UPDT: Filling of Auth data in Lsp failed
UPDT: Creation of Zero lsp Desc failed
UPDT: Adding Ipv4/v6 Address ipAddress into
pduLevel LSPs
UPDT: Adding in the LSP Neighbor option, TLV
22
Description
IS-IS received a CSNP packet.
pduLevel: L1 or L2.
sourceId: Source NSAP address of the CSNP
packet.
circuitName: Name of the interface through
which the CSNP packet was received.
Contents in the CSNP packet, including the
header, LSP entries, and Authentication
Information field.
IS-IS received a PSNP packet.
pduLevel: L1 or L2.
sourceId: Source NSAP address of the PSNP
packet.
circuitName: Name of the interface through
which the PSNP packet was received.
Contents in the corresponding PSNP packet,
including the header, LSP entries, and
Authentication Information field.
Description
The IS-IS process needs to be reset.
Local interface is up (IPv4/IPv6).
circName: Interface name.
Local interface is down (IPv4/IPv6).
circName: Interface name
Changing the local interface cost failed.
The IPv4/IPv6 address was added to the
interface.
ipAddress: Interface IP address.
The IPv4/IPv6 address was deleted from the
interface.
ipAddress: Interface IP address.
The default cost of the local interface
changed.
levelType: Interface level type, which can be
L1 or L2.
IS-IS started the LSP generation timer.
lspLevel: LSP type, which can be L1 or L2.
Filling authentication information in the locally
originated LSP failed.
Creating local zero LSP fragment failed.
The IP address was being added to the local
LSPs.
The neighbor TLV was added to the local LSP.